LIVING HOME LIVING HOME
LIVING HOME LIVING HOME
/
/
What are the steps for removing wires from the wall switch panel?

What are the steps for removing wires from the wall switch panel?

  • Categories:Living home
  • Time of issue:2021-11-30 15:01
  • Views:

(Summary description)Wall switch refers to the electrical switch installed on the wall, which is used to turn on and off the circuit and control the switch of lighting lamp. It is a household decoration functional article and a household appliance used to turn on and off the circuit. So, do you know what are the steps to remove the wires from the wall switch panel?
Switch socket
The removal steps of wall switch panel are as follows:
1. Turn on the wall switch and circuit breaker.
2. Fix the switch cover plate on the wall with a flat head screwdriver to the junction box, and remove the screws.
3. Unscrew two screws with a crosshead screwdriver for the switch and junction box.
4. On the upper side of the switch, loosen the terminal screw with a cross screwdriver and pull the wire away from the switch.
5. Electrician tape wrapped in each cap and wire tail cap further firmly, the East-West wire enters the junction box, and use the fixing screw to open the circuit breaker powered by the socket in the room.

What are the steps for removing wires from the wall switch panel?

(Summary description)Wall switch refers to the electrical switch installed on the wall, which is used to turn on and off the circuit and control the switch of lighting lamp. It is a household decoration functional article and a household appliance used to turn on and off the circuit. So, do you know what are the steps to remove the wires from the wall switch panel?
Switch socket
The removal steps of wall switch panel are as follows:
1. Turn on the wall switch and circuit breaker.
2. Fix the switch cover plate on the wall with a flat head screwdriver to the junction box, and remove the screws.
3. Unscrew two screws with a crosshead screwdriver for the switch and junction box.
4. On the upper side of the switch, loosen the terminal screw with a cross screwdriver and pull the wire away from the switch.
5. Electrician tape wrapped in each cap and wire tail cap further firmly, the East-West wire enters the junction box, and use the fixing screw to open the circuit breaker powered by the socket in the room.

  • Categories:Living home
  • Time of issue:2021-11-30 15:01
  • Views:
Information

Wall switch refers to the electrical switch installed on the wall, which is used to turn on and off the circuit and control the switch of lighting lamp. It is a household decoration functional article and a household appliance used to turn on and off the circuit. So, do you know what are the steps to remove the wires from the wall switch panel?
Switch socket
The removal steps of wall switch panel are as follows:
1. Turn on the wall switch and circuit breaker.
2. Fix the switch cover plate on the wall with a flat head screwdriver to the junction box, and remove the screws.
3. Unscrew two screws with a crosshead screwdriver for the switch and junction box.
4. On the upper side of the switch, loosen the terminal screw with a cross screwdriver and pull the wire away from the switch.
5. Electrician tape wrapped in each cap and wire tail cap further firmly, the East-West wire enters the junction box, and use the fixing screw to open the circuit breaker powered by the socket in the room.

Keyword:

Scan the QR code to read on your phone